北亿纤通荣誉产品

SFP-1000Base-1310nm

产品分类：SFP 光模块

模块封装：

模块波长：

更新时间：2012-08-31 09:43

官方网址：http://www.f-tone.com

数据手册：请联系我们sales获得

售价￥

购买须知

☉推荐兼容品牌：

H3C 华三	ZTE 中兴	Huawei	CSICO 思科	ZYXEL 合勤	HP 惠普	zyxel合勤	Linksys
DCN	extrem	RedBack	Juniper	3COM	Ruijie	Netgear	ALPHQ
Bdcom	D-link	Avaya	alcatel	AlliedTelesis	Intel	Nortel	SMC
Dell	Emulex	Enterasys	Feixun	Force10	Brocade	Adtran	IPTIME
Hirschmann	IBM	Asante	Motorola	Linksys	Marconi	Foundry	Maipu
McAfee	Blade	Nortel	Planet	Q-logic	SMC	IP-COM	Asante
SUN	Telco	TRENDnet	Vixel	Broadcom	Marvell	TENDA	TP-link
磊科	HILLSTONE	XIRCOM	水星网络	欣全	VIGOR	港湾	AMD
侠诺	艾泰	飞鱼星	博威	五舟	摩羯	Marvell	Samsung
宝德	飞迈瑞克	JCG	Altera	世纪飞扬	浪潮	清华同方	华硕/联想

注：购买时请说明你想用那个厂家的设备，谢谢！

☉如果需要详细的数据手册，请联系我们的SALES，谢谢！
☉如果应用中遇到什么问题，请联系我们的FAE，我们将为你提供更多、更好的资源！

CONTENT

SFP-1000Base-1310nm

特点：	应用：
Up to 1.25Gbps data rate Distance up to 550m for 50/125um and 62.5/125um MMFs or 10km for 9/125um SMF Duplex LC receptacle optical interface compliant Single +3.3V power supply Receiver Loss of Signal Output AC coupling of PECL signals Serial ID module on MOD(0-2) International Class 1 laser safety certified Transmitter disable input	Gigabit Ethernet 1000Base-LX Gigabit Fiber Channel Switch to switch interface Switched backplane 应用

Absolute Maximum Ratings

Parameter	Symbol	Unit	Min	Max
Storage Temperature Range	Ts	℃	-40	+85
Relative Humidity	RH	%	5	95
Power Supply Voltage	Vcc	V	-0.5	+4

Recommended Operating Conditions

Parameter	Symbol	Unit	Min	Typ	Max
Case Operating Temperature -CT	T_C-CT	℃	-5		70
Case Operating Temperature -ET	T_C-ET	℃	-5		85
Case Operating Temperature - IT	T_C-IT	℃	-40		85
Power Supply Voltage	Vcc	V	3.135	3.3	3.465
Data rate		Gb/s		1.25/1.0625

Specifications (tested under recommended operating conditions, unless otherwise noted)

Parameter			Symbol	Unit	Min	Typ	Max	Notes
Electrical Characteristics
Supply Current		Tx Section	Icc	mA			300	1
Supply Current		Rx Section	Icc	mA			300	1
Single Ended Data Input Swing				mV	150		1200
Single Ended Data Output Swing				mV	300		600
TX_fault /LOS output (TTL)			VOH	V	2.0		Vcc
TX_fault /LOS output (TTL)			VOL	V	0		0.8
TX_disable input (TTL)			VOH	V	2.0		Vcc
TX_disable input (TTL)			VOL	V	0		0.8
Optical transmitter Characteristics
Launch Optical Power			Po	dBm	-9	-5	-3
Center Wavelength Range			lλc	nm	1270	1310	1355
Extinction Ratio			EX	dB	9
Spectral Width (RMS)			D△λl	nm			4
Contributed Total Jitter added at TP2			TJ	UI			0.284	2
Relative Intensity Noise			RIN	dB /Hz			-120	3
Eye Diagram			Complies with IEEE802.3 eye masks when filtered
Dispersion Penalty				dB			1	on 10km SMF
Optical Rise/Fall Time			Trise/Tfall	ps			260	4
Optical receiver Characteristics
Receiver Sensitivity			S	dBm			-20	5
Overload Input Optical Power			Pin	dBm	-3			5
LOS	Optical Reassert		P_Deassert	dB			-20
LOS	Optical Assert		P_Assert	dB	-35
LOS Hysteresis			P_in	dB	0.5	3	6	6

Note1.    The supply current includes SFP module’s supply current and test board working current.
Note2.    TP refers to the compliance point specified in IEEE802.3, section 38.2.1.
Note3.    RIN is the laser noise, integrated over a specified bandwidth, measured relative to average optical power with
           12dB return loss.
Note4.    Optical transition time is the time interval required for t he rising or f alling edge o f an optical pulse to transition
                 between the 20% and 80% amplitudes relative to the logical 1 and 0 levels.
Note5.    Measured with a PRBS 27-1 test pattern, @1.25Gb/s, EX=9dB, BER<10-12.
Note6.    The LOS Hysteresis to minimize “chatter” on the output line. I n principle, Hysteresis alone does not guarantee
                chatter-free operation.

上一篇：SFP-1000Base-1550NM 下一篇：SFP-1000Base-LX-1310nm